METALICAPT® fibers for waste treatment and metal recycling

METALICAPT® sorbents composed from nano/micro-fibres, having more powerful pollutants removal properties compare to actual metal removal technologies.

AJELIS fibers have extremely high metal capture speed, selectivity, capacity and a decreased regeneration demand frequency which, is to a great extent, a function of their extremely large surface areas.

METALICAPT® sorbents allow to remove heavy metals (copper nickel, zinc, lead, chrome, cobalt…) as well as some toxic organic compounds. These sorbents can substitute the conventional ion exchange resins or istalled in complement to your tertiary treatment procedures.

Benefits of fibers compare to ion exchange/chelating resins :

  • Greater metal absorption capacity  and selectivity :

– selectivity for Cs and Sr over Na

– heavy metal removal

– rare earths/ heavy metals, heavy / light rare earths selective separation

– precious metal separation from cyanide solutions

  • Extra-high capacity
  • Tolerance to organics – it is not necessary to deploy additional scavenging resin systems or activated carbon precursors
  • Same set-up as ion exchange resins – but resins can be changed for AJELIS fibres
  • Lower bed-volume passage
  • Smaller scale treatment plants are possible
  • Absorption of low level metal concentrations (below the threshold of conventional resins)
  • Regeneration with the use of around 10 times less acid compare to resins
  • Regeneration speed is higher (compared to circa 10x longer with a traditional ion exchange resin)
  • Enhanced efficiency gives significant performance gains and reduced operational and capital costs
  • >100 regenerations possible, no chemical degeneration through regeneration

Industrial Kit

Column of about 9 L containing appropriate METALICAPT ® fibers in order to resolve your water treatment problem. Starting from 890 € HT, this offer include column with its support, filtering materials, the delivery, advice on getting started and for material regeneration if needed. This column can treat the effluent flow from 0,01 m3/h up to 1 m3/h.

Download column technical description.

Contact us to get your column.

Take our Laboratory Test Kit to discover the fiber materials

The Test Kit comes complete with  samples of vaious fibers ready to use, packaged in small filter columns. Read more

Weak and strong acidic cation exchange fibers

Applications :

  • Removal of heavy metals: Copper (II), Nickel (II), Zinc (II), Cadmium (II), Cobalt (II), Strontium (II), Lead (II), Magnesium (II), Chromium (III), Iron (II);
  • Drinking water treatment: removal of Calcium and Magnesium ions;
  • Sorption of organic ionizible substances (examples: dyes, vitamins, antibiotics);
  • Reduction of the effluent volume thanks to a concentration of heavy metal contaminated aqueous solutions.

Chelating fiber

Applications :

  • Water purification: removal of Iron (II);
  • Removal of heavy metals: Copper (II), Nickel (II), Zinc (II), Cadmium (II), Cobalt (II), Strontium (II), Lead (II), Magnesium (II), Chromium (III), Iron (II);
  • High removal capacity for the radionuclide Sr ;
  • Reduction of the effluent volume thanks to a concentration of heavy metal contaminated aqueous solutions.

Mixed weak acidic cation and basic anion exchange fiber

Applications :

  • Removal of heavy metals: Copper (II), Nickel (II), Zinc (II), Cadmium (II), Cobalt (II), Strontium (II), Lead (II), Magnesium (II), Chromium (III), Iron (II);
  • Removal of anionic heavy metals: oxoanions of Chromium, Molybdenum, Tungsten and Vanadium;
  • Reduction of the effluent volume thanks to a concentration of heavy metal contaminated aqueous solutions.

Specific fiber for Silver

Applications :

  • Water treatment: removal of Silver (I) ions;
  • Removal of heavy metals: Copper (II), Nickel (II), Zinc (II), Cadmium (II), Cobalt (II), Strontium (II), Lead (II), Magnesium (II), Chromium (III), Iron (II).

Specific fiber for Arsenic

Applications :

  • Water treatment: removal of Arsenic (III) and Arsenic (IV) ions ;
  • Removal of heavy metals: Copper (II), Nickel (II), Zinc (II), Cadmium (II), Cobalt (II), Strontium (II), Lead (II), Magnesium (II), Chromium (III), Iron (II).

Weak and strong basic anion exchange fiber

Applications :

  • Removal of nitrates;
  • Removal of anionic heavy metals: oxoanions of Chromium, Molybdenum, Tungsten and Vanadium ;

Active carbon fiber

Applications :

  • Removal of organic pollutants (examples: pesticides, drugs, dyes);
  • Dechlorination ;
  • Removal of hydrocarbons.

Innovative materials based on polymer fibers:

  • selectivity “all rare metals/ other metals”
  • selectivity between  some neighbor rare metals
The integration of these new materials into modern recycling processes will bring the following benefits:
  • low consumption of toxic organic solvents compare to the liquid-liquid extraction processes,

  • about 10-time less regeneration cycles needed due to fiber high capacity,

  • réduction d’un facteur 10 du temps nécessaire à l’extraction des métaux,

  • fibers are not powders  : easy handling and transport of dangerous waste are guaranteed (rare earths are often associated with other radioactive elements such as thorium or uranium)


Fibers for selective removal of cesium(Cs).

Fibers for selective removal of strontium (Sr).

Fibers for selective separation of monovalent metal ions from di-/trivalent metal ions.

Fibers for anion selective removal.

Request more information…

Chromatography fibers :

– strong anionic exchanger, binds negatevly-charged target

– weak cationic exchanger

– strong cationic exchanger

 

Request more information…

AJELIS propose the Kit allowing the testing of METALICAPT® fibers in operating conditions for the treatment of your effluents:

–         capture of polluting ions, ions of interest or organics;

–         deionized water production;

–         lower the concentrations below discharge thresholds;

–         chromatography purification of biomolecules

Download the User Manual

*Our products and engineering services can be proposed in combined manner or kept separated according to your needs.

Tell us more about your specific needs by completing the short “Effluent Survey”, this will allow us to choose for you the best materials to test.

Download the “Efflent Survey”

You can send us the Survey as attachement by filling the form and clicking on “Send” button or simply send it by email to :

    Name*

    Email*

    Tel.

    Company*

    Subject Let us know of your interest...

    Your Message

    Top
    We use cookies in order to give you the best possible experience on our website. By continuing to use this site, you agree to our use of cookies.
    Accept
    Reject
    Privacy Policy